Migrate from Kamal

You have a config/deploy.yml and the kamal CLI. This guide maps every Kamal concept onto its voodu equivalent so you can move an app over without re-learning the whole model.

TL;DR

Both tools deploy Docker containers over SSH. No Kubernetes, no agents on a control plane you don't own. The difference is how state is managed:

• Kamal is imperative. config/deploy.yml describes intent, but the kamal CLI is what orchestrates: it SSHes to each host, pulls images, boots containers, runs hooks. Nothing reconciles after the command exits — if a container dies, it stays dead until you run kamal again.
• voodu is declarative. Your HCL manifests are the desired state. vd apply ships them to a controller that runs on each host. The controller reconciles: it keeps replicas at the declared count, restarts crashed containers, re-derives ingress routes, and re-runs probes. You describe the end state once; the controller holds it.

Practically: you stop hand-orchestrating rollouts. You declare what should be true and let the controller converge on it.

deploy.yml -> voodu HCL

Two structural shifts to internalize:

• Roles become deployments. Kamal's web and job roles are two entries under servers: sharing one image. In voodu they're two deployment resources in the same scope. They still share an image if you point both at the same image (or build once and tag — see build-modes).
• Accessories become plugin resources. Kamal accessories are sidecar containers you kamal accessory boot. voodu stateful services are first-class plugin-managed resources: you declare postgres {} / redis {} in the same HCL and they're applied together with the rest. The plugin owns provisioning, health, and lifecycle.

A worked example

A representative config/deploy.yml — web + job roles, a registry, clear and secret env, proxy SSL, postgres and redis accessories, a builder:

service: shop
image: ghcr.io/acme/shop

servers:
  web:
    hosts:
      - 203.0.113.10
  job:
    hosts:
      - 203.0.113.10
    cmd: bundle exec sidekiq -C config/sidekiq.yml

registry:
  server: ghcr.io
  username: acme-ci
  password:
    - KAMAL_REGISTRY_PASSWORD

env:
  clear:
    RAILS_ENV: production
    RUBYOPT: -W0
  secret:
    - RAILS_MASTER_KEY
    - DATABASE_URL

proxy:
  ssl: true
  host: shop.example.com

builder:
  arch: amd64
  dockerfile: Dockerfile
  context: .

accessories:
  db:
    image: postgres:16
    host: 203.0.113.10
    env:
      clear:
        POSTGRES_DB: shop_production
  redis:
    image: redis:7
    host: 203.0.113.10

The equivalent voodu.hcl — scope shop, a built web deployment, a worker deployment for Sidekiq, an ingress with TLS, a registry, and the postgres + redis plugins:

registry "ghcr" {
  url      = "ghcr.io"
  username = "acme-ci"
  token    = "${GHCR_TOKEN}"
}

deployment "shop" "web" {
  replicas = 1

  build {
    context    = "."
    dockerfile = "Dockerfile"
    args       = { arch = "amd64" }
  }

  command = ["bundle", "exec", "puma", "-p", "8080"]

  env = {
    RAILS_ENV = "production"
    RUBYOPT   = "-W0"
    PORT      = "8080"
  }

  ports = ["8080"]

  release {
    command = ["bin/rails", "db:migrate"]
    timeout = "10m"
  }
}

deployment "shop" "worker" {
  replicas = 1
  build {
    context    = "."
    dockerfile = "Dockerfile"
  }

  command = ["bundle", "exec", "sidekiq", "-C", "config/sidekiq.yml"]

  env = {
    RAILS_ENV = "production"
    RUBYOPT   = "-W0"
  }
}

ingress "shop" "web" {
  host    = "shop.example.com"
  service = "web"
  port    = 8080

  tls {
    email = "[email protected]"
  }
}

postgres "shop" "db" {}

redis "shop" "cache" {}

Secrets stay out of the manifest. Set them once per host with vd config — scope-level config merges into every resource in the scope automatically:

vd config shop set RAILS_MASTER_KEY=... -r prod
vd config shop set DATABASE_URL=postgres://... -r prod
vd config ghcr set GHCR_TOKEN=... -r prod

Then deploy:

vd remote add prod [email protected]
vd apply -f voodu.hcl -r prod

The release {} block runs db:migrate once against the new image before the rolling restart, and aborts the rollout if it fails — the same gate Kamal's pre-deploy hook gives you, but declared in the manifest. See release.

If you'd rather skip the build and deploy a pre-built image (closer to Kamal's image: default), drop the build {} block and set image = "ghcr.io/acme/shop:<tag>" instead.

Command cheatsheet

What you gain / what changes

What you gain:

• Self-healing. The controller reconciles to the declared replicas. A crashed container comes back without you running anything. Under Kamal a dead container stays dead until the next kamal deploy.
• Probes gate the rollout. Declare a readiness probe and the controller won't shift traffic to a replica until it's healthy — and won't complete a release if the new image won't come up.
• Ingress is first-class. Hosts, TLS, and routing are declared resources the controller reconciles, not a proxy you boot and configure imperatively. Change the host in HCL, re-apply, the route updates.
• Accessories are managed. Postgres and Redis are plugin-owned resources with their own provisioning and health, not raw sidecar containers you keep alive yourself.

What changes:

• You stop hand-orchestrating. There's no kamal deploy that walks hosts in sequence. You vd apply the desired state; the controller on each host converges. For multiple hosts you apply to each remote.
• One controller per host. voodu runs a long-lived controller; Kamal has nothing resident. That's the price of reconciliation — a process that's always there to hold state.
• Desired state, not commands. Manifests describe the end state. There's no imperative boot this accessory or exec that migration as a deploy step — migrations are a release {} block, accessories are declared resources. The shift is from a sequence of actions to a description of what should be true.

None of this is free: a resident controller is more than a CLI that exits. The trade is operational — you give up imperative control of each step in exchange for a system that keeps the declared state without you in the loop.

See also

• Procfile mode — if your app is foreman/Heroku-shaped, you may not need HCL at all
• deployment — the core long-running resource
• ingress — hosts, TLS, routing
• release — once-per-release migration gate
• registry — private image pulls
• config — env and secrets
• build and build-modes — building from source
• voodu-postgres, voodu-redis — the accessory replacements
• vd apply, vd remote